REGULUS®-system E-VENT – water wall radiator with a fan
Copper-aluminium water wall radiator E-VENT,resembles other REGULUS-system wall radiators – the difference is that a fan can be installed on the radiator. The bottom part the coalescing plate pack features an opening, inside of which are magnets for easy plugging in and out of the fan (or fans for longer radiators). Thanks to the fan, the unit heats with variable power, matching the user’s needs, increasing its power. It is also possible to control the heating dynamics (optional).
It can be used in any type of system – copper, plastic (designed for use in central heating systems) or traditional steel system. It can work with different heat sources: electric, gas or oil boilers, and district heating. Due to the permissible operating parameters (1.5 MPa, 110°C) it can be used in steam powered systems.
The radiator with a fan can be used in residential construction in both single-and multi-family homes, public utility buildings, manufacturing and service facilities.
he special feature of REGULUS-system E-VENT radiators , that is the fan assisting convection, significantly improves their efficiency in low temperature systems, eco-friendly heat sources such as condensing boilers, heat pumps, multi-source systems with a central heating buffer tank. The fan increases the cooling of the heating medium in the radiator, and hence increases the heat output to the room – you can therefore get more power without changing the size of the radiator.
With high power and rapid spread the heat in the room, radiators with a fan are ideal for heating large interior areas. A fan increasing the power of the radiator is also very useful in situations when rapid increase of temperature in the room is required, such as during colder periods or in premises used periodically. Savings resulting from the possibility of a temporarily turning off heating or reduction in the temperature in a room are obvious.
REGULUS-system E-VENT radiators can work even after turning off or dismantling the fan, when they behave like a standard water radiator. With an easy assembly and dismantling of the fan, E-VENT radiator will be perfect for systems equipped with a standard central heating boiler working on higher parameters, which in the future will be replaced by an ecological low temperature heat source (condensing boiler, central heating pump). In the first stage, the radiator will operate without a fan, and then after the change of the heat source to a low-temperature one, already with a fan.
REGULUS®-system SOLLARIUS DUBEL – twice the power
The DUBEL radiator is constructed of two bodies of SOLLARIUS type radiators connected in parallel in a common housing – thickness of 18 cm. It is an alternative to steel triple panel radiators. The SOLLARIUS DUBEL series is the only solution on the market: a radiator with a height of just 12 cm (+ mounting bracket – 8 cm in height) for installation in floors as an upright unit. SOLLARIUS DUBEL is mounted along the large windows, in areas with high demand for heat, usually in refurbished buildings where you cannot install larger wall radiators and it is too late for the installation of a trench system.