SOLLARIUS ⋆ REGULUS System

Wall mounted radiator SOLLARIUS

REGULUS® – system SOLLARIUS radiator consists is constructed of two systems: water system and heat transfer system:
Water system – is constructed of evenly distributed inside the heater, horizontal, copper heating pipes connected at their ends with vertical, copper collectors. The connection of the heating tubes with the collectors is made by soldering (hard soldering).
The heat transfer system – is made of aluminium sheet fins set vertically on the heating pipes of the water system. Appropriately bent front and back edges of the lamellas fit tightly together to form the front and back wall of the heater. All casing elements are made of aluminium.

Connection of copper and aluminium is a dry connection, therefore there is no electrochemical phenomenon in it.

Dynamic heating

Distance from the wall

Warranty

Small water capacity

For heat pumps

Eco

Radiation of heat in all directions

Natural convection

For condensing boilers

SOLLARIUS – special features

Copper-aluminium
mixed method of heat emission: radiation + convection
corrugated, very large heat exchange surface, an important feature for heating based on a low temperature of the heating agent – condensation boilers, heat pumps
high efficiency at low flow temperatures – copper and aluminium are characterised by a high heat transfer coefficient (higher than steel and cast iron), heat is emitted even at a small temperature difference (heater and ambient)
low weight and low water capacity mean high heating dynamics, the heaters quickly reach their full rated power for a given flow temperature – low thermal inertia
low thermal inertia enables energy-efficient and easily controllable heating, it means effective operation in modern, controlled
central heating systems
high resistance to changeable and high pressure

SOLLARIUS radiators may be used in any type of installation – copper, plastic or traditional steel. They cooperate with electric, gas, oil and solid fuel boilers. They can be connected to steam heating network. They work perfectly with condensing boilers and in systems operated by heat pumps. They can be filled with antifreeze (important for summer houses used periodically).

SOLLARIUS radiators are used in:

single and multi-family buildings – possibility to be supplied from the municipal network
energy-saving houses – possibility of using in every configuration of central heating system
frame and wooden houses – very light heaters mean easy transport and installation, even on plasterboard walls
holiday homes – the heaters can be filled with antifreeze
buildings with older installations – available spacing 50 mm (as for traditional ribs and panels)
public utilities, offices and authorities
educational, teaching and childcare buildings – low contact temperature
sacral buildings – active air mixing, uniform temperature distribution, humidity removal
Sports facilities, gyms, SPA-type facilities
cultural, banking, tourist, commercial and catering facilities
warehouses and large buildings, industrial buildings – the possibility of temporary temperature reduction and even switching off some zones with the option of quick activation
facilities with increased humidity, swimming pools, car washes, winter gardens, vessels and port infrastructure
high resistance to corrosion

Height: 120-1115 mm
Lenght: 400-2000 mm
Width: 90 mm
Connections:
side – GW 1/2 ” (Female thread)
bottom – GW 1/2 ” (Female thread, Spacing 50 mm)

Operating pressure: 1,5 MPa
Operating temperature: up to +110°С
Water capacity: 0,12-2,38 dm³
Weight: 0,8 – 23,2 kg
Distance between radiator and wall: 2 cm

Advantages of SOLLARIUS radiator:

copper-aluminium construction ensures high efficiency at low flow temperatures
copper and aluminium are characterised by a high heat transfer coefficient (higher than steel and cast iron), heat is emitted even at a small temperature difference (heater and ambient)
corrugated, very large heat exchange surface, an important feature for heating based on a low temperature of the heating agent – condensation boilers, heat pumps
low own weight and small water capacity mean high heating dynamics, the heaters quickly reach their full rated power for a given flow temperature
low thermal inertia enables energy-efficient and easily controllable heating
Heating of the room takes place in a mixed way:
– by intense, wide-angle heat radiation from the front corrugated surface of the heater
– by convection

Air drawn in from below through the heater’s numerous convection chimneys flows through the heater’s interior, heats up after coming into contact with the surface of the pipes and fins and then flows out at the top through the perforated top casing. This double method of heat emission results in even heating of the air in the entire room.

Method of heat emission by REGULUS-system heaters

Illustration of the heat transfer by omnidirectional radiation from the surface – REGULUS-system heater

Illustration of heat transfer by perpendicular radiation from the surface – Finned aluminium heater

Any RAL colour included in the price

Colours from RAL K7 palette – powder varnish. Standard colour white – RAL 9003
Radiators in colours from the following colour chart (RAL K7) are available at list price, without an extra charge. An additional charge of 10% of the radiator’s list price shall apply to metallic colours, METALLIC version as well as convectors painted with structured paints.
The RAL K7 pattern book is available at our distributors.

NOTE: The colours displayed on the monitor may vary slightly from the actual RAL colours depending on the monitor’s parameters, therefore the presented list should be treated as indicative only! Please contact us by telephone to confirm colour matching.

Swimming pool version

SWIMMING POOL VERSION – these are special versions of wall mounted heaters intended for areas with increased humidity, such as swimming pools, car washes, laundries, conservatories, etc.
Their special resistance results from two features:
*construction – REGULUS®-system wall heaters are made of copper (exchanger) and aluminium (covers, lamellas), i.e. metals extremely resistant to corrosion. Unlike steel heaters, which quickly and easily succumb to destructive corrosion, copper and aluminium, when subjected to the process of oxidation, form oxides which, permanently connected to the non-oxidised material, constitute a tight protective layer for the process to continue deep into the structure of these metals.
*thickened layer of special varnish – an important protection, both against moisture and the impact of chemicals (used in swimming pools and other such facilities), is a durable, thickened layer of polyester-epoxy varnish hardened at high temperature. The mounting elements of the heaters are also made of aluminium profiles coated with facade powder varnish.

WARRANTY: 10 YEARS

POOL DESIGN PRICE = REGULAR PRICE OF THE HEATER – NO SURCHARGE – ATTENTION TEMPORARY PROMOTION

Choose a radiator for yourself

Types of connection
Technical data
Correction coefficients
Accessories included
Accessories
Warranty
Download

The radiators are symmetrical, their front and back are identical. They are reversible, i.e. they can be installed with an approach (connection) from the left or right side.

Output table for SOLLARIUS radiators for individual connection types

Type	Height [mm]	Length [mm]	Thickness [mm]	Power [W] 75/65/20	Power [W] 55/45/20	Power [W] 45/35/20
SOLLARIUS 1/40	120	400	90	142	86	57
SOLLARIUS 1/60	120	600	90	248	149	100
SOLLARIUS 1/80	120	800	90	353	213	142
SOLLARIUS 1/100	120	1000	90	492	297	199
SOLLARIUS 1/120	120	1200	90	632	381	255
SOLLARIUS 1/140	120	1400	90	787	474	318
SOLLARIUS 1/160	120	1600	90	942	568	380
SOLLARIUS 1/180	120	1800	90	1103	665	445
SOLLARIUS 1/200	120	2000	90	1264	762	510
SOLLARIUS 2/40	210	400	90	197	119	79
SOLLARIUS 2/50	210	500	90	271	163	109
SOLLARIUS 2/60	210	600	90	344	207	139
SOLLARIUS 2/70	210	700	90	417	251	168
SOLLARIUS 2/80	210	800	90	490	295	198
SOLLARIUS 2/90	210	900	90	587	354	237
SOLLARIUS 2/100	210	1000	90	684	412	276
SOLLARIUS 2/110	210	1100	90	781	471	315
SOLLARIUS 2/120	210	1200	90	878	529	354
SOLLARIUS 2/140	210	1400	90	1093	659	441
SOLLARIUS 2/160	210	1600	90	1308	788	528
SOLLARIUS 2/180	210	1800	90	1532	923	618
SOLLARIUS 2/200	210	2000	90	1756	1058	709
SOLLARIUS 3/40	300	400	90	288	174	116
SOLLARIUS 3/50	300	500	90	392	236	158
SOLLARIUS 3/60	300	600	90	494	298	199
SOLLARIUS 3/70	300	700	90	586	353	236
SOLLARIUS 3/80	300	800	90	678	409	274
SOLLARIUS 3/90	300	900	90	807	486	326
SOLLARIUS 3/100	300	1000	90	935	564	377
SOLLARIUS 3/110	300	1100	90	1039	626	419
SOLLARIUS 3/120	300	1200	90	1144	690	462
SOLLARIUS 3/140	300	1400	90	1432	863	578
SOLLARIUS 3/160	300	1600	90	1689	1018	682
SOLLARIUS 3/180	300	1800	90	1948	1174	786
SOLLARIUS 3/200	300	2000	90	2199	1325	887
SOLLARIUS 4/40	390	400	90	379	228	153
SOLLARIUS 4/50	390	500	90	512	309	207
SOLLARIUS 4/60	390	600	90	644	388	260
SOLLARIUS 4/70	390	700	90	755	455	305
SOLLARIUS 4/80	390	800	90	866	522	349
SOLLARIUS 4/90	390	900	90	1026	618	414
SOLLARIUS 4/100	390	1000	90	1185	714	478
SOLLARIUS 4/110	390	1100	90	1297	782	523
SOLLARIUS 4/120	390	1200	90	1479	892	597
SOLLARIUS 4/140	390	1400	90	1771	1068	715
SOLLARIUS 4/160	390	1600	90	2071	1248	836
SOLLARIUS 4/180	390	1800	90	2363	1424	954
SOLLARIUS 4/200	390	2000	90	2642	1593	1066
SOLLARIUS 5/40	480	400	90	429	259	173
SOLLARIUS 5/50	480	500	90	607	366	245
SOLLARIUS 5/60	480	600	90	783	472	316
SOLLARIUS 5/70	480	700	90	941	567	380
SOLLARIUS 5/80	480	800	90	1099	662	444
SOLLARIUS 5/90	480	900	90	1288	776	520
SOLLARIUS 5/100	480	1000	90	1477	890	596
SOLLARIUS 5/110	480	1100	90	1655	998	668
SOLLARIUS 5/120	480	1200	90	1833	1105	740
SOLLARIUS 5/140	480	1400	90	2274	1371	918
SOLLARIUS 5/160	480	1600	90	2679	1615	1081
SOLLARIUS 5/180	480	1800	90	3020	1820	1219
SOLLARIUS 5/200	480	2000	90	3364	2028	1358
SOLLARIUS 6/40	570	400	90	479	289	193
SOLLARIUS 6/50	570	500	90	701	423	283
SOLLARIUS 6/60	570	600	90	922	556	372
SOLLARIUS 6/70	570	700	90	1127	679	455
SOLLARIUS 6/80	570	800	90	1331	802	537
SOLLARIUS 6/90	570	900	90	1550	934	626
SOLLARIUS 6/100	570	1000	90	1769	1066	714
SOLLARIUS 6/110	570	1100	90	2013	1213	812
SOLLARIUS 6/120	570	1200	90	2257	1360	911
SOLLARIUS 6/140	570	1400	90	2777	1674	1121
SOLLARIUS 6/160	570	1600	90	3287	1981	1326
SOLLARIUS 6/180	570	1800	90	3676	2216	1483
SOLLARIUS 6/200	570	2000	90	4086	2463	1649
SOLLARIUS 8/40	755	400	90	720	434	291
SOLLARIUS 8/50	755	500	90	972	586	392
SOLLARIUS 8/60	755	600	90	1224	738	494
SOLLARIUS 8/70	755	700	90	1435	865	579
SOLLARIUS 8/80	755	800	90	1645	992	664
SOLLARIUS 8/90	755	900	90	1949	1175	787
SOLLARIUS 8/100	755	1000	90	2252	1357	909
SOLLARIUS 8/110	755	1100	90	2465	1486	995
SOLLARIUS 8/120	755	1200	90	2677	1614	1080
SOLLARIUS 8/140	755	1400	90	3365	2028	1358
SOLLARIUS 10/40	935	400	90	858	517	346
SOLLARIUS 10/50	935	500	90	1212	731	489
SOLLARIUS 10/60	935	600	90	1566	944	632
SOLLARIUS 10/70	935	700	90	1882	1134	759
SOLLARIUS 10/80	935	800	90	2197	1324	887
SOLLARIUS 10/90	935	900	90	2576	1553	1040
SOLLARIUS 10/100	935	1000	90	2954	1781	1192
SOLLARIUS 10/110	935	1100	90	3310	1995	1336
SOLLARIUS 10/120	935	1200	90	3666	2210	1479
SOLLARIUS 10/140	935	1400	90	4548	2741	1835
SOLLARIUS 12/40	1115	400	90	958	577	387
SOLLARIUS 12/50	1115	500	90	1401	844	565
SOLLARIUS 12/60	1115	600	90	1844	1112	744
SOLLARIUS 12/70	1115	700	90	2253	1358	909
SOLLARIUS 12/80	1115	800	90	2662	1605	1074
SOLLARIUS 12/90	1115	900	90	3100	1869	1251
SOLLARIUS 12/100	1115	1000	90	3538	2133	1428
SOLLARIUS 12/110	1115	1100	90	4026	2427	1625
SOLLARIUS 12/120	1115	1200	90	4514	2721	1822
SOLLARIUS 12/140	1115	1400	90	5554	3348	2241

		Room temperature
tz	tp	5	8	12	16	20	22	24
95	90	0.575	0.595	0.624	0.656	0.692	0.711	0.731
	85	0.592	0.613	0.644	0.678	0.716	0.737	0.758
	80	0.609	0.632	0.665	0.701	0.742	0.764	0.788
	75	0.628	0.652	0.687	0.726	0.770	0.794	0.819
	70	0.648	0.674	0.711	0.753	0.800	0.826	0.854
90	85	0.610	0.633	0.665	0.702	0.743	0.765	0.788
	80	0.629	0.653	0.688	0.727	0.771	0.795	0.820
	75	0.649	0.674	0.712	0.754	0.801	0.827	0.854
	70	0.670	0.697	0.737	0.782	0.834	0.862	0.892
	65	0.692	0.722	0.765	0.814	0.869	0.9	0.933
85	80	0.649	0.675	0.712	0.754	0.802	0.828	0.855
	75	0.671	0.698	0.738	0.783	0.834	0.863	0.893
	70	0.693	0.722	0.766	0.814	0.870	0.901	0.934
	65	0.717	0.749	0.795	0.848	0.909	0.942	0.978
	60	0.743	0.777	0.828	0.885	0.951	0.988	1.028
80	75	0.694	0.723	0.767	0.815	0.871	0.902	0.935
	70	0.718	0.750	0.796	0.849	0.910	0.943	0.980
	65	0.744	0.778	0.829	0.886	0.952	0.989	1.029
	60	0.772	0.809	0.864	0.926	0.999	1.040	1.084
	55	0.803	0.842	0.902	0.970	1.050	1.096	1.145
75	70	0.745	0.779	0.83	0.887	0.953	0.99	1.03
	65	0.773	0.810	0.865	0.927	1.000	1.041	1.085
	60	0.804	0.843	0.903	0.971	1.052	1.097	1.146
	55	0.836	0.879	0.944	1.020	1.109	1.159	1.215
	50	0.872	0.919	0.990	1.074	1.173	1.229	1.292
70	65	0.805	0.844	0.904	0.973	1.053	1.098	1.148
	60	0.837	0.881	0.946	1.021	1.110	1.161	1.216
	55	0.873	0.920	0.992	1.075	1.174	1.231	1.294
	50	0.912	0.964	1.042	1.135	1.246	1.310	1.382
	45	0.955	1.011	1.098	1.202	1.327	1.401	1.483
65	60	0.874	0.921	0.993	1.077	1.176	1.233	1.295
	55	0.913	0.965	1.044	1.136	1.248	1.312	1.383
	50	0.956	1.013	1.100	1.204	1.329	1.403	1.485
60	55	0.957	1.014	1.101	1.205	1.331	1.405	1.487
	50	1.004	1.067	1.164	1.281	1.424	1.509	1.604
	45	1.056	1.126	1.234	1.367	1.532	1.630	1.742
	40	1.113	1.191	1.314	1.465	1.657	1.772	1.906
55	50	1.058	1.127	1.236	1.369	1.534	1.633	1.745
	45	1.115	1.193	1.316	1.468	1.659	1.775	1.909
	40	1.179	1.267	1.407	1.582	1.807	1.946	2.108
	35	1.252	1.351	1.511	1.715	1.984	2.153	2.354
50	45	1.182	1.269	1.409	1.585	1.810	1.949	2.112
	40	1.254	1.353	1.514	1.718	1.987	2.157	2.358
	35	1.336	1.449	1.636	1.877	2.204	2.414	2.670
	30	1.429	1.56	1.778	2.069	2.473	2.742	3.078
45	40	1.338	1.452	1.639	1.881	2.208	2.419	2.675
	35	1.432	1.563	1.782	2.073	2.478	2.748	3.084
	30	1.540	1.693	1.953	2.308	2.824	3.181	3.642
40	35	1.543	1.697	1.957	2.314	2.831	3.188	3.65
40	30	1.669	1.851	2.166	2.611	3.292	3.788	4.462
35	30	1.822	2.041	2.430	3.006	3.946	4.681	5.759

Description:
tz – Flow temperature
tp – Return temperature

In the description of the heater parameters tz appears as the first value, tp as the second, and the room temperature as the third, e.g. 55/45/20

To calculate the heating power for non-standard supply parameters, divide the heating power for parameter 75/65/20 by the value read from the correction factor table.

For example, we are looking for the heating power for the S6/60 radiator for the parameter 70/50/20. The power for 75/65/20 is 922 W. In the table of correction factors, we read the coefficient for: tz = 70, tp = 50, room temperature = 20. In the table of correction coefficients read the value of the coefficient for: tz = 70, tp = 50, room temperature = 20. For these parameters the coefficient is: 1,246.
Therefore: 922/1,246 ≈740 W

HEATER ACCESSORIES SUPPLIED TOGETHER WITH THE RADIATOR, INCLUDED IN THE PRICE.

A set of wall hangers or a set of feet for floor mounting (one option to be selected), dowels, screws, air vent, in the bottom-supplied heaters a thermoregulatory valve with pre-adjustment, connection gaskets and installation manual.

THERMOSTAT VALVE INLET – with presetting – valve type SFP-10-1N – manufacturer Vario Term, valve body permanently installed in the factory in types: SD and SDCG. Pre-setting key available at extra charge.

AIR VENT – manual heater vent – ½”, opened with a spanner or a flathead screwdriver after pointing the faucet in the desired direction.

FLOOR STANDS – almost any heater can be mounted as a floor stand – suitable for its height. The assembly kit includes two stands screwed to the floor + dowels and screws, two connection gaskets, assembly instructions

UNIVERSAL WALL HANGS – one type for all types of radiators. The set includes two bottom brackets, two top profiles with stabilizing hooks, dowels, screws, two connection gaskets, assembly instructions. The distance between the radiator and the wall is 2 cm.

AURATON CONTROL

A wireless set AURATON 200 TRA consists of an electronic head and a temperature regulator (backlit LCD display). It enables a precise and effective regulation of temperature in rooms (daily cycle). One regulator may cooperate with any number of TRA heads. The set includes also: straight thermostatic valve and straight shut-off valve.

Properties:

extended holiday mode
service switch
calibration of temperature and time indications
possibility of working in on/off or PWM mode
suitable for installation on M30x1.5 heater inserts

SALUS-HTRP-RF(50)

SALUS TRV10RFM

SALUS CO10R

SALUS CONTROL

Wireless digital ZigBee network controller HTRP-RF(50) enables temperature control via CO10RF coordinating unit in offline mode or via Internet gateway in online mode (UGE600-sold separately), it can be configured to work with electronic head (TRV). When using the UGE600 internet gateway – controllable via the SALUS Smart Home app.

Features:

built-in energy-saving TPI control algorithm
three temperature levels
additional functions: PARTY and HOLIDAY
possibility to work in manual mode (permanently or temporarily)
VP function – protects thermostatic valves against freezing
memory backup in case of power failure

The set includes:

SALUS HTRP-RF(50) temperature controller – dimensions 85x85x25 – power supply 2xAA
wireless thermostatic head – SALUS TRV10RFM – M30x1,5 – power supply 2xAA,
ZigBee network coordinator (Offline), can handle up to 30 regulators, 9 slats and 90 heater heads
straight thermostatic valve and straight shut-off valve

Straight thermostatic valve
SFP-15-1N with adjustable position, ½” M30 x 1.5

Thermostatic angle valve
SFK-15-1N with adjustable position, ½” M30 x 1.5

Straight shut-off valve
FP-DN-15, ½’’’

Regulus thermostatic head gs. 02 – white
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Regulus thermostatic head gs. 02 – satin
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Regulus thermostatic head gs. 02 – gold
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Angle shut-off valve
FK-DN-15, ½

600-zawór-odcinający-prosty-dwururowy-400x400

Straight dual shut-off valve
¾ x ¾

600-zawór-odcinający-kątowy-dwururowy-400x400

Angle dual shut-off valve
¾ x ¾

WARRANTY CONDITIONS

25 YEARS WARRANTY!!!

REGULUS®-system radiators are covered by a 25-year warranty – the warranty covers the tightness of heaters water system. Heater lifespan is comparable to the lifespan of copper installations and may be even several dozen years!

WARRANTY CONDITIONS

REGULUS®-system spółka jawna (general partnership) with its registered office at 51 Grażyńskiego Street in Bielsko-Biała, Poland, gives a warranty for its products: REGULUS®-system water-filled radiators.

The Manufacturer declares that the REGULUS®-system radiators are made in accordance with the EN-442 European Standard.

The Manufacturer’s warranty covers the leaktightness of the radiator water system. The warranty period varies depending on the place of application, thus, it is:

25 YEARS for radiators for facilities with microclimates typical of residential premises, offices and the like.

10 YEARS for radiators for facilities with high moisture of air and an increased hygiene and health regime, like swimming pools, car washes, drying rooms, vessels, commercial premises and all kinds of industrial buildings, including the port infrastructure.

This warranty does not affect any of the consumer’s statutory rights relating to the product type’s incompatibility with the sales agreement.
The User’s rights under this warranty may only be exercised via the company, from which the product was purchased. They may be exercised directly at the Manufacturer’s only if the point of sale, in which the product was purchased, has been closed down.
This warranty shall be valid from the date of purchase as specified in the purchase document. The User’s rights under this warranty may only be exercised upon production of the purchase document along with the confirmed Warranty Card.
If an event covered by the warranty occurs in the warranty period, the complaining User can demand the radiator to be replaced with another one of the same type.
The new product shall be given to the User at the place of defect notification within 14 days from the date of notification. On reception of the new product, the User shall return the faulty radiator, unless the event has occurred during the ongoing heating season. In such a case, the faulty radiator shall be returned after the actual replacement.
The Manufacturer shall cover the costs of the replacement of the faulty radiator with a new, fault-free one after receiving the relevant bill. The costs of this service shall be agreed on between the Manufacturer and the User in advance.
Warranties for the control fittings shall be provided by their respective manufacturers.
The Manufacturer’s warranty does not cover the functions and durability built in the thermostatic valves in bottom-fed radiators. These are covered by their manufacturer’s warranties.

ITEMS NOT COVERED BY THIS WARRANTY

Any defects resulting from misuse of the product. Permissible system operating parameters: Water temperature – 110 °C, operating pressure – 1.5 MPa.

Leakages resulting from incorrect installation of the radiator, the valve air vent or their components, and particularly from defrosting or using wrong sealing materials. Side-fed radiators are fitted with a rotatable half union for front sealing with gaskets.

Defects and inconveniences resulting from incorrect installation or incorrect plumbing adjustment of the radiator and system water pollution.

Mechanically damaged products (in particular with traces of impact, scratches, dents, twists – e.g. air vent or pipe sockets) shall not be subject to replacement.

The warranty shall be void when the User or anyone else modifies or repairs any product of the REGULUS®-system company without authorization.

The warranty shall be void when the mechanical filter mounted on the power supply of the central heating system, to which the REGULUS®-system radiators are connected, is removed. This particularly refers to a system with steel components.

The REGULUS®-system company reserves the right to modify its products without prior notice.

ITEMS NOT AFFECTING THE WARRANTY

Any kind of divisor mounted on the external surface of REGULUS®-system radiators, provided this does not damage the radiator water system.

REGULUS®-system radiators mounted within open central heating systems.

Radiators mounted within systems supplied directly by the municipal heat distribution network, not by way of a heat exchanger.

Periodic emptying of the central heating system, provided the other system components allow for such an operation and the operation will not make the components corrode.

The User receiving the product together with the Warranty Card accepts all the above warranty terms.

Download files

Types of connection

The radiators are symmetrical, their front and back are identical. They are reversible, i.e. they can be installed with an approach (connection) from the left or right side.

Technical data

Output table for SOLLARIUS radiators for individual connection types

Type	Height [mm]	Length [mm]	Thickness [mm]	Power [W] 75/65/20	Power [W] 55/45/20	Power [W] 45/35/20
SOLLARIUS 1/40	120	400	90	142	86	57
SOLLARIUS 1/60	120	600	90	248	149	100
SOLLARIUS 1/80	120	800	90	353	213	142
SOLLARIUS 1/100	120	1000	90	492	297	199
SOLLARIUS 1/120	120	1200	90	632	381	255
SOLLARIUS 1/140	120	1400	90	787	474	318
SOLLARIUS 1/160	120	1600	90	942	568	380
SOLLARIUS 1/180	120	1800	90	1103	665	445
SOLLARIUS 1/200	120	2000	90	1264	762	510
SOLLARIUS 2/40	210	400	90	197	119	79
SOLLARIUS 2/50	210	500	90	271	163	109
SOLLARIUS 2/60	210	600	90	344	207	139
SOLLARIUS 2/70	210	700	90	417	251	168
SOLLARIUS 2/80	210	800	90	490	295	198
SOLLARIUS 2/90	210	900	90	587	354	237
SOLLARIUS 2/100	210	1000	90	684	412	276
SOLLARIUS 2/110	210	1100	90	781	471	315
SOLLARIUS 2/120	210	1200	90	878	529	354
SOLLARIUS 2/140	210	1400	90	1093	659	441
SOLLARIUS 2/160	210	1600	90	1308	788	528
SOLLARIUS 2/180	210	1800	90	1532	923	618
SOLLARIUS 2/200	210	2000	90	1756	1058	709
SOLLARIUS 3/40	300	400	90	288	174	116
SOLLARIUS 3/50	300	500	90	392	236	158
SOLLARIUS 3/60	300	600	90	494	298	199
SOLLARIUS 3/70	300	700	90	586	353	236
SOLLARIUS 3/80	300	800	90	678	409	274
SOLLARIUS 3/90	300	900	90	807	486	326
SOLLARIUS 3/100	300	1000	90	935	564	377
SOLLARIUS 3/110	300	1100	90	1039	626	419
SOLLARIUS 3/120	300	1200	90	1144	690	462
SOLLARIUS 3/140	300	1400	90	1432	863	578
SOLLARIUS 3/160	300	1600	90	1689	1018	682
SOLLARIUS 3/180	300	1800	90	1948	1174	786
SOLLARIUS 3/200	300	2000	90	2199	1325	887
SOLLARIUS 4/40	390	400	90	379	228	153
SOLLARIUS 4/50	390	500	90	512	309	207
SOLLARIUS 4/60	390	600	90	644	388	260
SOLLARIUS 4/70	390	700	90	755	455	305
SOLLARIUS 4/80	390	800	90	866	522	349
SOLLARIUS 4/90	390	900	90	1026	618	414
SOLLARIUS 4/100	390	1000	90	1185	714	478
SOLLARIUS 4/110	390	1100	90	1297	782	523
SOLLARIUS 4/120	390	1200	90	1479	892	597
SOLLARIUS 4/140	390	1400	90	1771	1068	715
SOLLARIUS 4/160	390	1600	90	2071	1248	836
SOLLARIUS 4/180	390	1800	90	2363	1424	954
SOLLARIUS 4/200	390	2000	90	2642	1593	1066
SOLLARIUS 5/40	480	400	90	429	259	173
SOLLARIUS 5/50	480	500	90	607	366	245
SOLLARIUS 5/60	480	600	90	783	472	316
SOLLARIUS 5/70	480	700	90	941	567	380
SOLLARIUS 5/80	480	800	90	1099	662	444
SOLLARIUS 5/90	480	900	90	1288	776	520
SOLLARIUS 5/100	480	1000	90	1477	890	596
SOLLARIUS 5/110	480	1100	90	1655	998	668
SOLLARIUS 5/120	480	1200	90	1833	1105	740
SOLLARIUS 5/140	480	1400	90	2274	1371	918
SOLLARIUS 5/160	480	1600	90	2679	1615	1081
SOLLARIUS 5/180	480	1800	90	3020	1820	1219
SOLLARIUS 5/200	480	2000	90	3364	2028	1358
SOLLARIUS 6/40	570	400	90	479	289	193
SOLLARIUS 6/50	570	500	90	701	423	283
SOLLARIUS 6/60	570	600	90	922	556	372
SOLLARIUS 6/70	570	700	90	1127	679	455
SOLLARIUS 6/80	570	800	90	1331	802	537
SOLLARIUS 6/90	570	900	90	1550	934	626
SOLLARIUS 6/100	570	1000	90	1769	1066	714
SOLLARIUS 6/110	570	1100	90	2013	1213	812
SOLLARIUS 6/120	570	1200	90	2257	1360	911
SOLLARIUS 6/140	570	1400	90	2777	1674	1121
SOLLARIUS 6/160	570	1600	90	3287	1981	1326
SOLLARIUS 6/180	570	1800	90	3676	2216	1483
SOLLARIUS 6/200	570	2000	90	4086	2463	1649
SOLLARIUS 8/40	755	400	90	720	434	291
SOLLARIUS 8/50	755	500	90	972	586	392
SOLLARIUS 8/60	755	600	90	1224	738	494
SOLLARIUS 8/70	755	700	90	1435	865	579
SOLLARIUS 8/80	755	800	90	1645	992	664
SOLLARIUS 8/90	755	900	90	1949	1175	787
SOLLARIUS 8/100	755	1000	90	2252	1357	909
SOLLARIUS 8/110	755	1100	90	2465	1486	995
SOLLARIUS 8/120	755	1200	90	2677	1614	1080
SOLLARIUS 8/140	755	1400	90	3365	2028	1358
SOLLARIUS 10/40	935	400	90	858	517	346
SOLLARIUS 10/50	935	500	90	1212	731	489
SOLLARIUS 10/60	935	600	90	1566	944	632
SOLLARIUS 10/70	935	700	90	1882	1134	759
SOLLARIUS 10/80	935	800	90	2197	1324	887
SOLLARIUS 10/90	935	900	90	2576	1553	1040
SOLLARIUS 10/100	935	1000	90	2954	1781	1192
SOLLARIUS 10/110	935	1100	90	3310	1995	1336
SOLLARIUS 10/120	935	1200	90	3666	2210	1479
SOLLARIUS 10/140	935	1400	90	4548	2741	1835
SOLLARIUS 12/40	1115	400	90	958	577	387
SOLLARIUS 12/50	1115	500	90	1401	844	565
SOLLARIUS 12/60	1115	600	90	1844	1112	744
SOLLARIUS 12/70	1115	700	90	2253	1358	909
SOLLARIUS 12/80	1115	800	90	2662	1605	1074
SOLLARIUS 12/90	1115	900	90	3100	1869	1251
SOLLARIUS 12/100	1115	1000	90	3538	2133	1428
SOLLARIUS 12/110	1115	1100	90	4026	2427	1625
SOLLARIUS 12/120	1115	1200	90	4514	2721	1822
SOLLARIUS 12/140	1115	1400	90	5554	3348	2241

Correction coefficients

		Room temperature
tz	tp	5	8	12	16	20	22	24
95	90	0.575	0.595	0.624	0.656	0.692	0.711	0.731
	85	0.592	0.613	0.644	0.678	0.716	0.737	0.758
	80	0.609	0.632	0.665	0.701	0.742	0.764	0.788
	75	0.628	0.652	0.687	0.726	0.770	0.794	0.819
	70	0.648	0.674	0.711	0.753	0.800	0.826	0.854
90	85	0.610	0.633	0.665	0.702	0.743	0.765	0.788
	80	0.629	0.653	0.688	0.727	0.771	0.795	0.820
	75	0.649	0.674	0.712	0.754	0.801	0.827	0.854
	70	0.670	0.697	0.737	0.782	0.834	0.862	0.892
	65	0.692	0.722	0.765	0.814	0.869	0.9	0.933
85	80	0.649	0.675	0.712	0.754	0.802	0.828	0.855
	75	0.671	0.698	0.738	0.783	0.834	0.863	0.893
	70	0.693	0.722	0.766	0.814	0.870	0.901	0.934
	65	0.717	0.749	0.795	0.848	0.909	0.942	0.978
	60	0.743	0.777	0.828	0.885	0.951	0.988	1.028
80	75	0.694	0.723	0.767	0.815	0.871	0.902	0.935
	70	0.718	0.750	0.796	0.849	0.910	0.943	0.980
	65	0.744	0.778	0.829	0.886	0.952	0.989	1.029
	60	0.772	0.809	0.864	0.926	0.999	1.040	1.084
	55	0.803	0.842	0.902	0.970	1.050	1.096	1.145
75	70	0.745	0.779	0.83	0.887	0.953	0.99	1.03
	65	0.773	0.810	0.865	0.927	1.000	1.041	1.085
	60	0.804	0.843	0.903	0.971	1.052	1.097	1.146
	55	0.836	0.879	0.944	1.020	1.109	1.159	1.215
	50	0.872	0.919	0.990	1.074	1.173	1.229	1.292
70	65	0.805	0.844	0.904	0.973	1.053	1.098	1.148
	60	0.837	0.881	0.946	1.021	1.110	1.161	1.216
	55	0.873	0.920	0.992	1.075	1.174	1.231	1.294
	50	0.912	0.964	1.042	1.135	1.246	1.310	1.382
	45	0.955	1.011	1.098	1.202	1.327	1.401	1.483
65	60	0.874	0.921	0.993	1.077	1.176	1.233	1.295
	55	0.913	0.965	1.044	1.136	1.248	1.312	1.383
	50	0.956	1.013	1.100	1.204	1.329	1.403	1.485
60	55	0.957	1.014	1.101	1.205	1.331	1.405	1.487
	50	1.004	1.067	1.164	1.281	1.424	1.509	1.604
	45	1.056	1.126	1.234	1.367	1.532	1.630	1.742
	40	1.113	1.191	1.314	1.465	1.657	1.772	1.906
55	50	1.058	1.127	1.236	1.369	1.534	1.633	1.745
	45	1.115	1.193	1.316	1.468	1.659	1.775	1.909
	40	1.179	1.267	1.407	1.582	1.807	1.946	2.108
	35	1.252	1.351	1.511	1.715	1.984	2.153	2.354
50	45	1.182	1.269	1.409	1.585	1.810	1.949	2.112
	40	1.254	1.353	1.514	1.718	1.987	2.157	2.358
	35	1.336	1.449	1.636	1.877	2.204	2.414	2.670
	30	1.429	1.56	1.778	2.069	2.473	2.742	3.078
45	40	1.338	1.452	1.639	1.881	2.208	2.419	2.675
	35	1.432	1.563	1.782	2.073	2.478	2.748	3.084
	30	1.540	1.693	1.953	2.308	2.824	3.181	3.642
40	35	1.543	1.697	1.957	2.314	2.831	3.188	3.65
40	30	1.669	1.851	2.166	2.611	3.292	3.788	4.462
35	30	1.822	2.041	2.430	3.006	3.946	4.681	5.759

Description:
tz – Flow temperature
tp – Return temperature

In the description of the heater parameters tz appears as the first value, tp as the second, and the room temperature as the third, e.g. 55/45/20

To calculate the heating power for non-standard supply parameters, divide the heating power for parameter 75/65/20 by the value read from the correction factor table.

Accessories included

HEATER ACCESSORIES SUPPLIED TOGETHER WITH THE RADIATOR, INCLUDED IN THE PRICE.

AIR VENT – manual heater vent – ½”, opened with a spanner or a flathead screwdriver after pointing the faucet in the desired direction.

Accessories

AURATON CONTROL

Properties:

extended holiday mode
service switch
calibration of temperature and time indications
possibility of working in on/off or PWM mode
suitable for installation on M30x1.5 heater inserts

SALUS-HTRP-RF(50)

SALUS TRV10RFM

SALUS CO10R

SALUS CONTROL

Features:

built-in energy-saving TPI control algorithm
three temperature levels
additional functions: PARTY and HOLIDAY
possibility to work in manual mode (permanently or temporarily)
VP function – protects thermostatic valves against freezing
memory backup in case of power failure

The set includes:

SALUS HTRP-RF(50) temperature controller – dimensions 85x85x25 – power supply 2xAA
wireless thermostatic head – SALUS TRV10RFM – M30x1,5 – power supply 2xAA,
ZigBee network coordinator (Offline), can handle up to 30 regulators, 9 slats and 90 heater heads
straight thermostatic valve and straight shut-off valve

Straight thermostatic valve
SFP-15-1N with adjustable position, ½” M30 x 1.5

Thermostatic angle valve
SFK-15-1N with adjustable position, ½” M30 x 1.5

Straight shut-off valve
FP-DN-15, ½’’’

Regulus thermostatic head gs. 02 – white
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Regulus thermostatic head gs. 02 – satin
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Regulus thermostatic head gs. 02 – gold
liquid with fixing nut
M30 x 1,5, closing dimension: 11.5 mm
closing stroke up to 2.5 mm

Angle shut-off valve
FK-DN-15, ½

Straight dual shut-off valve
¾ x ¾

Angle dual shut-off valve
¾ x ¾

Warranty

WARRANTY CONDITIONS

25 YEARS WARRANTY!!!

WARRANTY CONDITIONS

The Manufacturer declares that the REGULUS®-system radiators are made in accordance with the EN-442 European Standard.

The Manufacturer’s warranty covers the leaktightness of the radiator water system. The warranty period varies depending on the place of application, thus, it is:

25 YEARS for radiators for facilities with microclimates typical of residential premises, offices and the like.

This warranty does not affect any of the consumer’s statutory rights relating to the product type’s incompatibility with the sales agreement.
The User’s rights under this warranty may only be exercised via the company, from which the product was purchased. They may be exercised directly at the Manufacturer’s only if the point of sale, in which the product was purchased, has been closed down.
This warranty shall be valid from the date of purchase as specified in the purchase document. The User’s rights under this warranty may only be exercised upon production of the purchase document along with the confirmed Warranty Card.
If an event covered by the warranty occurs in the warranty period, the complaining User can demand the radiator to be replaced with another one of the same type.
The new product shall be given to the User at the place of defect notification within 14 days from the date of notification. On reception of the new product, the User shall return the faulty radiator, unless the event has occurred during the ongoing heating season. In such a case, the faulty radiator shall be returned after the actual replacement.
The Manufacturer shall cover the costs of the replacement of the faulty radiator with a new, fault-free one after receiving the relevant bill. The costs of this service shall be agreed on between the Manufacturer and the User in advance.
Warranties for the control fittings shall be provided by their respective manufacturers.
The Manufacturer’s warranty does not cover the functions and durability built in the thermostatic valves in bottom-fed radiators. These are covered by their manufacturer’s warranties.

ITEMS NOT COVERED BY THIS WARRANTY

Any defects resulting from misuse of the product. Permissible system operating parameters: Water temperature – 110 °C, operating pressure – 1.5 MPa.

Leakages resulting from incorrect installation of the radiator, the valve air vent or their components, and particularly from defrosting or using wrong sealing materials. Side-fed radiators are fitted with a rotatable half union for front sealing with gaskets.

Defects and inconveniences resulting from incorrect installation or incorrect plumbing adjustment of the radiator and system water pollution.

Mechanically damaged products (in particular with traces of impact, scratches, dents, twists – e.g. air vent or pipe sockets) shall not be subject to replacement.

The warranty shall be void when the User or anyone else modifies or repairs any product of the REGULUS®-system company without authorization.

The warranty shall be void when the mechanical filter mounted on the power supply of the central heating system, to which the REGULUS®-system radiators are connected, is removed. This particularly refers to a system with steel components.

The REGULUS®-system company reserves the right to modify its products without prior notice.

ITEMS NOT AFFECTING THE WARRANTY

Any kind of divisor mounted on the external surface of REGULUS®-system radiators, provided this does not damage the radiator water system.

REGULUS®-system radiators mounted within open central heating systems.

Radiators mounted within systems supplied directly by the municipal heat distribution network, not by way of a heat exchanger.

Periodic emptying of the central heating system, provided the other system components allow for such an operation and the operation will not make the components corrode.

The User receiving the product together with the Warranty Card accepts all the above warranty terms.

Download

Download files