REGULLUS

REGULLUS is the wall radiator with characteristic oval top cover. The design of the heater makes the REGULLUS wall radiators universally applicable. It results from a number of unique functional features. They are light. Stainless. Resistant to high pressure and large pressure surges in the installation. They can cooperate with the following boilers: electric, gas and oil, and can be connected to municipal heating network.

Thanks to precise quality control and durability of materials they are constructed from, they are covered by a 25-year warranty for leak tightness. Choosing REGULLUS heaters you may be sure that it is a good investment for many years. They are economical and energy-saving and heat the room efficiently and quickly

Design of the REGULLUS radiator

The REGULLUS radiator is constructed of two systems: water system and heat transfer system::

• Water system – is constructed of evenly distributed inside the radiator, horizontal, copper heating pipes connected at their ends with vertical, copper collectors. The connection of the heating tubes with the collectors is made by soldering (hard soldering).
• The heat transfer system – is made of aluminium sheet fins set vertically on the heating pipes of the water system. Appropriately bent front and back edges of the lamellas fit tightly together to form the front and back wall of the radiator. All casing elements are made of aluminium.

Connection of copper and aluminium is a dry connection, therefore there is no electrochemical phenomenon in it.

REGULLUS – special features

Unique capabilities of regulus are the result of many of its features, such as.:

• specific construction – water system made of copper, heat transfer system made of aluminium
• high thermal conductivity coefficient – copper and aluminium,
• mixed method of heat emission: radiation + convection
• corrugated, very large heat exchange surface, an important feature for heating based on a low temperature of the heating agent – condensation boilers, heat pumps
• high efficiency at low flow temperatures – copper and aluminium have a high heat transfer coefficient (several times higher than steel and cast iron) – heat is emitted even at a slight temperature difference (heater and ambient)
• low own weight and small water capacity mean high heating dynamics, the heaters quickly reach their full rated power for a given flow temperature – low thermal inertia
• low thermal inertia enables precise, energy-efficient and easily controllable heating, it means efficient operation in modern, controlled central heating systems
• high resistance to changeable and high pressure

REGULLUS heaters may be used in any type of installation – copper, plastic or traditional steel. They cooperate with electric, gas, oil and solid fuel boilers. They can be connected to steam heating network. They work perfectly with condensing boilers and in systems operated by heat pumps. They can be filled with antifreeze (important for summer houses used periodically).

REGULLUS radiators are perfectly suitable in::

• single and multi-family buildings – possibility to be supplied from the municipal network
• energy-saving houses – possibility of using in every configuration of central heating system.
• frame and wooden houses – very light heaters mean easy transport and installation, even on plasterboard walls
• holiday homes – the heaters can be filled with antifreeze
• buildings with older installations – available spacing 500 mm (as for traditional ribs and panels)
• educational, teaching and childcare buildings – low contact temperature
• sacral buildings – active air mixing, uniform temperature distribution, humidity removal
• warehouses and large buildings, industrial buildings – the possibility of temporary temperature reduction and even switching off some zones with the option of quick activation
• facilities with increased humidity, swimming pools, car washes, winter gardens, vessels and port infrastructure – high resistance to corrosion.

Mode of operation

Any RAL colour included in the price

Colours from RAL K7 palette – powder varnish. Standard colour white – RAL 9003
Radiators in colours from the following colour chart (RAL K7) are available at list price, without an extra charge. An additional charge of 10% of the radiator’s list price shall apply to metallic colours, METALLIC version as well as convectors painted with structured paints.
The RAL K7 pattern book is available at our distributors.

Swimming pool version

SWIMMING POOL VERSION – these are special versions of wall mounted heaters intended for areas with increased humidity, such as swimming pools, car washes, laundries, conservatories, etc.
Their special resistance results from two features:
*construction – REGULUS®-system wall heaters are made of copper (exchanger) and aluminium (covers, lamellas), i.e. metals extremely resistant to corrosion. Unlike steel heaters, which quickly and easily succumb to destructive corrosion, copper and aluminium, when subjected to the process of oxidation, form oxides which, permanently connected to the non-oxidised material, constitute a tight protective layer for the process to continue deep into the structure of these metals.
*thickened layer of special varnish – an important protection, both against moisture and the impact of chemicals (used in swimming pools and other such facilities), is a durable, thickened layer of polyester-epoxy varnish hardened at high temperature. The mounting elements of the heaters are also made of aluminium profiles coated with facade powder varnish.

WARRANTY: 10 YEARS

POOL DESIGN PRICE = REGULAR PRICE OF THE HEATER – NO SURCHARGE – ATTENTION TEMPORARY PROMOTION